AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Sheffield builder Lasefinity targets first-time metal AM buyers with £24,999 machines

Published 1 sourceSummary written with AIDeutsche Version

Lasefinity, a Sheffield machine builder, sells two compact metal systems from £24,999 each: the FusionX powder bed printer and the WireX wire-fed deposition machine. Founder Prveen Bidare aims them at small manufacturers and researchers who want to test metal AM before committing to a production machine costing far more.

Key facts
  • FusionX and WireX each start at £24,999
  • FusionX FX-500: 100 × 100 × 80 mm, 500 W fibre laser
  • WireX: 150 × 150 × 150 mm, 0.4 to 0.8 mm wire
  • Formnext 2026: Hall 12.0, Stand G130

Context Directed energy deposition (DED) feeds wire or powder into a laser-made melt pool to add metal locally, which suits fast build-up and repair.

Why build a small metal printer?

Bidare says many small firms want to adopt AM but find the entry price too high. A jeweller or spare-parts maker could face a machine costing around half a million while the application might still fail. He sees the first step as too high for a manufacturer who has a use case but has not yet made a part or learned what can go wrong.

A smaller bed also cuts the powder, space and energy needed for early trials. He named 100 mm and 150 mm cubes as sizes of interest during development.

What are FusionX and WireX?

FusionX is a laser powder bed system. The FX-500 has a 100 × 100 × 80 mm build volume and a 500 W fibre laser with a beam adjustable from 50 to 200 microns, so researchers can vary the energy delivered to the powder.

WireX is a wire-fed directed energy deposition machine with a 150 × 150 × 150 mm volume. It uses 0.4 to 0.8 mm wire and has a camera to watch the melt pool. Bidare still rates powder bed fusion higher for accuracy and points to repair, for example of aero-engine parts, as the main use of fine wire. Wire is also easier to handle than loose, flammable powder.

Where does the idea come from and what is next?

Bidare built a small open-architecture powder bed printer during his doctorate at Heriot-Watt University so that researchers could observe melting with X-rays. He worked at GE and Siemens, spent time at the Manufacturing Technology Centre and the University of Birmingham, and started Manufacturing Made Easy in 2022. Investors encouraged him to build the printer itself, and Lasefinity became the machine brand.

Powders so far came from UK sources and from US supplier 6K; he wants to try Chinese and Indian powders too. Over two to three years he wants to supply researchers and smaller firms, accepting that some will later move to larger systems. Lasefinity exhibits at Formnext, 17 to 20 November 2026, Hall 12.0, Stand G130.

What it means

For small and mid-sized EU manufacturers, a £24,999 entry point turns metal AM from a capital decision into a learning budget: test an application, learn failure modes and gauge workload before buying a production system. The small build volumes limit what can be made, and nothing in the report covers qualification or part properties, so these machines suit trials and repair experiments rather than certified series parts. Powder sourcing and handling remain cost and safety factors.

Earlier on AddiWire

Frequently asked questions

How much do Lasefinity's machines cost?

Both the FusionX powder bed system and the WireX wire-fed deposition machine start at £24,999.

What are the build volumes?

The FusionX FX-500 builds 100 × 100 × 80 mm with a 500 W fibre laser. WireX builds 150 × 150 × 150 mm using 0.4 to 0.8 mm wire.

Who is Lasefinity aimed at?

Materials researchers and smaller manufacturers who want to try metal AM and learn their process before moving to larger systems.

Read the original reports
  1. 3D Printing Industry, 16 Nov 2026