AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

3D Systems adds MJP 300 multijet printer and closed-loop metal powder module for Formnext

Published 1 sourceSummary written with AIDeutsche Version
3D Systems adds MJP 300 multijet printer and closed-loop metal powder module for Formnext
Image: 3D Systems

3D Systems announced the MJP 300 multijet printer, the TSR powder management module for its DMP Flex 350 metal printers, an update to 3D Sprint software with digital rights management, and an industrial wax kit. The MJP 300 can be bought from the first quarter of 2027, while TSR and the wax kit are available now. The company shows them at Formnext 2026 in Frankfurt, booth D11 in Hall 11.0.

Key facts
  • MJP 300 build volume is 294 x 211 x 144 mm with 16 micron layers
  • MJP 300 is available from Q1 2027; TSR and the wax kit now
  • TSR uses Russell Finex powder handling technology and serves DMP Flex 350 printers
  • Formnext 2026 runs November 17 to 20, 3D Systems at booth D11, Hall 11.0

Context Multijet printing deposits photopolymer or wax droplets layer by layer through inkjet-style heads. A closed-loop powder system recovers, sieves and reuses metal powder without exposing it to air.

What does the MJP 300 offer?

The MJP 300 is a multijet printer for plastic parts, aimed at faster and easier operation. It has HD, UHD and XHD build modes with 16 micron layers at 1600 x 900 dpi, and a build volume of 294 x 211 x 144 mm. The volume can be split into three lanes, so small or tall parts can be grouped in one lane for speed.

Five VisiJet acrylate materials are supported at launch: M2P-Crystal, M2R-WH, M2R-CL, M2R-TN and M2R-HT90, with more to follow. The machine has cybersecurity features designed to support ESA/IEC compliance, upgraded electronics, reduced support material use and hands-free post-processing. It runs within the new AddiTrak fleet management software. It will be on show at Formnext and can be bought from the first quarter of 2027.

How does the TSR module handle metal powder?

TSR (Transport-Sieve-Reload) is a mobile module that connects to DMP Flex 350 metal printers. It recovers, sieves and recirculates powder under inert conditions, which keeps powder quality for reuse and limits operator contact with the powder. It combines 3D Systems technology with powder handling technology from Russell Finex.

One TSR module can be shared across several compatible printers. It is the latest addition to the powder management options for the DMP Flex 350 and is available for purchase.

What changes in software and wax?

The 3D Sprint Pro software gets a toolset called .finite for cybersecurity and digital rights management. It is meant to prevent unauthorised access to print data, limit tampering, verify data integrity and restrict the number of prints specific workstations may make within set periods. It starts with the MJP 300W wax printer and the MJP 300, with more models planned for early 2027.

For the MJP 300W Plus, released in the third quarter of 2025, a new Industrial Wax kit enables VisiJet Wax Jewel Red for larger casting patterns, a use the company says is drawing interest from aerospace. The kit is available now.

What it means

For manufacturers, the most concrete items are the shareable TSR module, which addresses powder handling and operator exposure on the DMP Flex 350, and the wax kit, which is available today for larger casting patterns. The MJP 300 cannot be ordered until early 2027, so any business case rests on vendor figures for speed and material use that are not yet verified. The rights management tools matter mainly for firms sharing print data with partners or service bureaus.

Earlier on AddiWire

Frequently asked questions

When can the MJP 300 be bought?

3D Systems says the MJP 300 will be available to purchase in the first quarter of 2027. It is shown at Formnext 2026, November 17 to 20, booth D11 in Hall 11.0.

Which printers does the TSR module work with?

TSR connects to DMP Flex 350 metal 3D printers. A single module can be shared across several compatible printers.

What does the .finite tool do?

It is part of 3D Sprint Pro and protects print data: it limits unauthorised access and tampering, verifies data integrity and caps prints per workstation within set timelines. It starts on the MJP 300W and MJP 300.

Read the original reports
  1. 3D Systems, 16 Nov 2026