AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Rapid Fusion: large-format printers earn their keep on tooling and hard jobs

Published 1 sourceSummary written with AIDeutsche Version

Rapid Fusion co-founder Jake Hand describes how the UK maker of large-format industrial printers found its market in tooling. A defence customer printed a tool during acceptance testing that would have cost £50,000 in machined aluminium. Hand puts the installed base at about 43 systems and says most quoted business cases pay back within two years.

Key facts
  • Printed tool replaced a £50,000 machined aluminium tool, at about £5,000 in time and materials
  • Machined tooling typically takes 12 to 16 weeks; aluminium billet alone can take eight
  • About 43 systems installed, mostly UK and Central Europe
  • Most quoted business cases pay back within two years, per Hand

Context Site acceptance test is the customer's check of a delivered machine at its installation site before final sign-off.

What did the tooling swap save?

During the site acceptance test of a Rapid Fusion machine, a defence customer printed a tool that would normally be bought as a machined aluminium part for £50,000. Hand says the printed version cost about £5,000 in time and materials and took the place of the ordered tool.

He sees lead time as the bigger gain. Aluminium billet can take eight weeks to arrive, and a machined order typically takes 12 to 16 weeks. In that time requirements can change. Printing in-house lets the engineers who use a tool decide when it is made and when it is revised.

What did Rapid Fusion get wrong about its market?

The company grew out of reselling other makers' large-format filament printers through Evo 3D. Customers with a metre of build space were still bonding sections together. The plan was that building its own machine would earn more than reselling.

Hand found two separate buyer groups: those wanting a cheap printer for occasional jobs, and those with a task valuable enough to justify a premium machine. A product in between did not work, so Rapid Fusion chose the factory floor and, within it, tooling for aerospace and similar sectors.

How does it handle heat and machining accuracy?

Aerospace tooling customers ask what shape a tool takes at operating temperature. Deposited material can expand differently along and across the print lines, so the toolpath affects the result. Rapid Fusion developed thermal analysis software that uses the real deposition path, the material and the target temperature to predict distortion. The prediction informs both printing and the later milling step.

For machining a printed part of several metres, a scanning system builds a point cloud and fits the CAD model to the measured position. With, for example, eight millimetres of finishing stock allowed, the mill can find the target surface without manual touch-off of reference points.

Where are the machines going?

About 43 systems are installed, most in the UK, then Central Europe, with a team installing a machine in Honolulu. Resellers with their own service engineers and electricians take over after Rapid Fusion staff lead early installations. Hand estimates three to six months of heavy learning before operators understand a robotic system.

Shipbuilders are a new buyer group, with three or four deals in the previous month. Rapid Fusion is pursuing a Lloyd's Register route and says it won an Innovate UK bid for a vessel project. A three-year aerospace tooling bid awaited a decision in December. A containerised Medusa system has been trialled by parts of the UK Ministry of Defence, with a shipboard trial planned.

What it means

For small and mid sized manufacturers, the case rests on lead time and in-house control rather than on part price alone. Payback within two years is Hand's description of quoted business cases, not an audited figure. Large robotic cells also demand months of learning and still leave handling, sanding and machining work. The useful buyer question is what the builder has already delivered for the same job, including how it predicts dimensions after heating and milling.

Frequently asked questions

How many Rapid Fusion systems are installed?

Jake Hand puts the installed base at around 43 systems, with the largest concentration in the UK followed by Central Europe.

How quickly do Rapid Fusion machines pay back?

Hand says most of the business cases the company quotes show payback within two years.

Why is the thermal software needed?

Deposited material can expand differently along and across print lines, so tools printed with different paths can deform differently. The software predicts the shape change at operating temperature from the path, material and temperature.

Read the original reports
  1. 3D Printing Industry, 16 Nov 2026