AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Rapid Fusion and LEAM add local layer heating to Prometheus robot cell for PEEK and PEI

Published 1 sourceSummary written with AIDeutsche Version

Rapid Fusion of the UK and LEAM of Germany showed the Prometheus robot cell at Formnext. Its extruder carries a LEAM nozzle that reheats the zone just ahead of each new bead to improve layer bonding in large-format printing of PEEK and PEI. Market launch is planned for early next year.

Key facts
  • Prometheus robot cell shown at Formnext by Rapid Fusion and LEAM
  • Extruder integrates a LEAM nozzle with sensor-controlled local heating
  • Designed for PEEK and PEI in aerospace, marine, oil and gas
  • Launch planned early next year; over £2 million revenue expected within two years

Context Large format additive manufacturing (LFAM) prints big parts by extruding thermoplastic, often with robots; layer adhesion is its weak point because large parts cool unevenly between passes.

How does the heating work?

The new extruder was designed together with the LEAM nozzle, which warms the area directly before a new bead of material is laid down. Sensors measure temperature, and heat input is adjusted during printing. The aim is better bonding between successive layers, which matters in large parts where temperature swings and steep thermal gradients affect mechanical properties.

Which materials and markets are targeted?

The system is aimed at PEEK and PEI, high-temperature polymers that need tight control of the thermal process window. Target sectors are aerospace, marine, oil and gas, and clean mobility. Rapid Fusion combines printing with machining in its robot cells. LEAM argues that both polymers are already certified for major industrial uses, so users would avoid certifying a new material.

What is the status?

Customer orders exist for first deliveries, and Rapid Fusion expects more than two million pounds of combined revenue within two years. The announcement gave no independent data on strength, process stability or economics.

What it means

For manufacturers considering LFAM in PEEK or PEI, the main question is whether the heated nozzle delivers measurable interlayer strength on real parts. Using materials already certified for an industry can shorten qualification, but the printed part and process still need their own validation. Until independent test data and pricing appear, treat the claims as a pilot candidate. This follows Rapid Fusion's earlier large-format cell stories, where tooling and demanding jobs were the stated use cases.

Earlier on AddiWire

Frequently asked questions

When will Prometheus be available?

The partners plan to bring the robot cell to market early next year, and customer orders for first deliveries already exist.

What does the LEAM nozzle do?

It reheats the area just before a new material bead is deposited, with sensor feedback adjusting heat during the print, to improve layer bonding.

Is there independent performance data?

No. The announcement did not include independent measurements of strength, process stability or economics.

Read the original reports
  1. 3Druck.com, 19 Nov 2026