Why does a customer buy a second Renishaw machine?
Domin, a hydraulic valve maker, installed a four-laser RenAM 500Q near Bristol in 2023 and added a 500Q Ultra a year later. The two firms had worked together since 2019. Renishaw's Ed Littlewood says the valve is built around a printed body that could not be made another way, so more demand means more machines, and possibly production spread over several sites.
Renishaw entered metal AM by acquiring MTT in 2011, starting with dental and medical work. That taught the company that even capable customers need application engineers to take a part into production. Ben Deary reports that buyers now more often accept AM as a normal route, so talks move to whether the process suits a specific part.
How do TEMPUS and LIBERTAS raise output?
The RenAM 500 series has a build space of 250 by 250 by 350 mm. Moving from one laser to four was the first productivity step. TEMPUS then overlaps laser exposure with the recoater movement, which Renishaw says saves up to nine seconds on each layer. Littlewood says some builds could take roughly half the time, and that taller builds now make better use of the chamber.
LIBERTAS, released inside the QuantAM build preparation software, varies laser energy according to the local angle of a surface. Renishaw reports 50% less support material in some applications and 80 to 90% in others, depending on geometry, with no loss in finish, tolerance or mechanical performance seen so far. The settings are written into the sliced file before the build, so a rerun repeats the same exposure, which helps qualification. Licences are per QuantAM seat and files can run on several compatible machines.
What is Wolverhampton testing with beam shaping?
The university's Centre of Excellence for Shaped Laser Additive Manufacturing, developed with EOS and AMCM, runs a 1.2 kW AMCM system with an nLIGHT beam-shaping laser. It has worked in laser powder bed fusion since 1999. The team runs single-track tests across beam profiles for tungsten and molybdenum, and with an industrial partner for copper-coated diamond. John Robinson says an unexpectedly good tungsten melt pool appeared, but no finished parts have yet been compared with conventional ones, and whether parameters transfer to other machines is unknown.
Its copper work includes a photon absorber for Diamond Light Source, where one manifold replaced 21 brazed pipes. Simulation predicted 11% lower peak temperature and an 82% lower pressure drop, though only calculated figures exist and roughness, porosity and tolerance work remains. A printed vapour chamber worked but never became a product; Robinson says users need a large value gain to switch.