AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Desktop 3D printing

QIDI Q3D puts two independent hotends on a closed CoreXY printer from $529

Published 2 sourcesSummary written with AIDeutsche Version

QIDI presented the Q3D at Formnext 2026, a closed desktop FDM printer with two hotends that each have their own extruder and filament path. The maker says this avoids purging when materials change and shortens multi-material jobs. The base model lists at 599 euros or $599, with a presale price of 529 after a refundable 30 deposit.

Key facts
  • Two independent hotends, each with own extruder and filament path
  • Main hotend up to 350 °C, chamber heated to 70 °C
  • Build volume 260 × 260 × 260 mm, 240 × 260 × 255 mm in dual mode
  • Base price 599, presale 529 with refundable 30 deposit, shipping in about three months

Context Ringing, also called ghosting, is a ripple pattern on print surfaces caused by vibration of the moving toolhead.

How does the dual-hotend design work?

Both hotends sit on one lightweight toolhead but run separately: each has its own nozzle, extruder, filament path and temperature setting. On single-nozzle machines a material change normally means purging the old filament and waiting for a new nozzle temperature. QIDI says separate paths remove most of that, and quotes print times of up to 40 percent shorter than conventional two-colour printing. The Q3D can also print model and support from different filaments.

The main hotend reaches 350 °C with quick-release bimetal nozzles and handles PLA, PETG, TPU, PA, PC and carbon or glass fibre filled filaments. The build volume is 260 × 260 × 260 mm with the main nozzle and 240 × 260 × 255 mm in dual-nozzle mode.

What else is in the machine?

The CoreXY motion system uses linear rails on the X axis and reaches 600 mm/s at 20,000 mm/s² acceleration. The lighter toolhead is meant to reduce vibration and ringing. An eddy current sensor in the hotend probes the bed at the nozzle, so no Z offset needs to be set.

The fourth-generation active chamber heater reaches 70 °C and the bed 120 °C, aimed at warping and layer cracking in materials such as PA. An optional Polar Cooler cools the extruder, and two air intakes feed part cooling. Exhaust passes a three-stage filter with G3 pre-filter, H12 HEPA and activated carbon. The printer has an AI camera and Wi-Fi and works with QIDI Studio and third-party slicers, though some advanced features may need QIDI's software.

What does it cost and when does it ship?

The base Q3D lists at 599 euros, or 749 with the Polar Cooler. A combo with the QIDI Box 2 filament system costs 749, or 899 with the cooler. In presale, buyers reserve with a 30 deposit that QIDI refunds on request, and the base model drops by 100 to 529. Delivery is planned about three months after order and full payment.

What it means

For manufacturers the Q3D is mainly relevant as a low-cost tool for jigs, fixtures and prototypes in engineering filaments, not as a production platform. Dual independent hotends could make soluble or breakaway support and mixed-material fixtures cheaper to try. The time and filament savings are vendor claims and untested here, and no qualification or repeatability data is given. Shipping is about three months out, so any pilot is a 2027 matter.

Earlier on AddiWire

Frequently asked questions

What is special about the QIDI Q3D?

It carries two hotends in one toolhead, each with its own nozzle, extruder, filament path and temperature, so material changes need no purging according to QIDI.

How much does the QIDI Q3D cost?

The base model lists at 599 euros, or 529 in presale after a refundable 30 deposit. With the Polar Cooler it is 749, and the QIDI Box 2 combo is 749 or 899 with the cooler.

Which materials can it print?

The main hotend, up to 350 °C, handles PLA, PETG, TPU, PA, PC and carbon or glass fibre filled filaments.

Read the original reports
  1. 3Druck.com, 18 Nov 2026
  2. 3D Printing Industry, 19 Nov 2026