AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Materials

Prusa adds ESD PETG with carbon fiber and nanotubes for electronics fixtures

Published 1 sourceSummary written with AIDeutsche Version

Prusa has released Prusament PETG ESD, an electrostatic-dissipative PETG filament filled with carbon fiber and carbon nanotubes, at $56.99. It targets electronics production tooling such as PCB holders and IC trays rather than hobby use. The strength datasheet has not yet been published.

Key facts
  • Price: $56.99 for Prusament PETG ESD
  • Filled with carbon fiber and carbon nanotubes
  • Aimed at PCB fixtures, IC trays and test holders
  • Strength datasheet not yet published

Context ESD (electrostatic-dissipative) materials drain static charge slowly and in a controlled way, which protects sensitive electronic components from damage during handling.

What is new in the material

Prusament PETG ESD gets its dissipative properties from carbon nanotubes and carbon fiber together. Prusa says it is the first ESD filament to add carbon fiber, which should improve dimensional accuracy and reduce warping. 3DXTech and Polymaker already sell ESD filaments.

Intended use and price

Prusa points to PCB fixtures and soldering holders, IC trays for transport and holders for testing several boards at once. These could replace CNC-machined ESD trays and fixtures and be printed on site. At $56.99 it undercuts 3DXTech's ESD-PETG ($105) and Polymaker's Fiberon PETG-ESD ($65.98). Prusa also uses it in its own line to protect print-sheet edges during powder coating.

What is still open

No datasheet exists yet. Prusa claims higher stiffness and lower toughness, similar to its PETG Carbon Fiber, but the fiber content may differ.

What it means

For electronics manufacturers, printed ESD fixtures can shorten lead times compared with machined trays, and a lower filament price helps the business case. Without a datasheet, though, strength, surface resistance and batch consistency cannot be judged, and ESD tooling normally needs its own verification. Small companies should treat the price advantage as provisional until independent test data appears.

Frequently asked questions

How much does Prusament PETG ESD cost?

It costs $56.99, below 3DXTech's ESD-PETG at $105 and Polymaker's Fiberon PETG-ESD at $65.98.

Is the strength of the filament known?

No. Prusa has not published the datasheet yet and only claims higher stiffness and lower toughness, similar to its PETG Carbon Fiber.

Read the original reports
  1. Tom's Hardware 3D printing, 11 Nov 2026