Lithoz is launching the Performance Pack, an optional kit with a 4K projection system for the CeraFab S65 and S65 Medical. It doubles light intensity and raises the finest lateral resolution by 60%, and can be fitted to machines already in the field. The kit will be shown at Formnext 2026 in Frankfurt.
What does the Performance Pack change?
The kit replaces the projection stage with a 4K system. On the S65, light intensity rises from 60 to 120 mW/cm². The finest lateral resolution improves from 40 µm to 25 µm, which Lithoz describes as a 60% gain. Sharper edges and smoother surfaces are expected on fine-featured parts such as medical implants or components with internal channels.
Why does light intensity matter for dark ceramics?
Dark ceramics resist degradation in extreme environments and are of interest for uses such as hypersonic flight systems. Their pigment absorbs a larger share of the UV light than pale materials, so layers are harder to cure. With twice the intensity, enough light should remain to cure the layer even after absorption.
Which machines and what is on show at Formnext?
The kit is offered for the CeraFab S65 and the S65 Medical, both based on Lithoz's bottom-up LCM vat photopolymerization process. It can be retrofitted, and further platforms are to follow. At booth B50 in hall 11.0 (17 to 20 November), Lithoz will also show 116 aluminum nitride cool plates from one CeraFab S320 build, a casting core inside a turbine blade, rocket engine segments with Leap71, hydroxyapatite spinal cages with Spherene, and gyroid solid oxide fuel cell units from DTU Energy.
What it means
A retrofit path lowers the barrier for existing S65 users, since higher resolution and dark ceramics may become available without a new machine. Dark-ceramic processing and the 25 µm figure still need to be proven on real parts, and material availability, debinding and sintering remain separate hurdles. It follows the stronger-light push seen in Prodways' ceramic range, a sign that light power is becoming a key lever in ceramic vat photopolymerization.
Frequently asked questions
What is the Lithoz Performance Pack?
It is an optional tuning kit with a 4K projection system for the CeraFab S65 and S65 Medical. It doubles light intensity and raises the finest lateral resolution from 40 to 25 µm.
Can existing machines be upgraded?
Yes, the kit can be retrofitted into existing S65 and S65 Medical machines. Lithoz says further developments for other CeraFab platforms will follow.
Why are dark ceramics hard to print?
Their pigment absorbs more UV light than light ceramics, which makes curing the layers difficult. Higher light intensity is meant to leave enough light for curing.