AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Events

Formnext day two: new factory-scale systems, desktop colour jetting and big EOS orders

Published 1 sourceSummary written with AIDeutsche Version

A 3DPrint.com column from day two of Formnext 2026 lists launches in polymer and metal powder bed fusion, DED, desktop printers and materials. The author reads the show as smaller but busy, with vendors building machines together with customers and larger orders going to fewer buyers, such as VulcanForms' purchase of 200 EOS systems.

Key facts
  • Farsoon Flight HT1002P-CAMS: four 300 W lasers, 1,000 × 500 × 650 mm
  • EOS Helior targets a 700 × 380 × 580 mm build in 24 hours
  • HeyGears G1 colour jetting desktop machine costs about $3,000
  • VulcanForms' order of 200 EOS systems cited as proof of scaling

Which systems were shown in polymer and metal?

Farsoon released the Flight HT1002P-CAMS, a polymer system with four 300 W lasers and a 1,000 × 500 × 650 mm build volume, with a conveyor that moves builds in and out. A metal system with the same feature was also shown. 3D Systems presented the MJP 300, and Stratasys showed an updated, larger SAF system. EOS showed the three-laser Helior for large-part, 24/7 production: the company expects a full 700 × 380 × 580 mm build in 24 hours at 10% packing density, with laser exposure adjustable to part geometry.

In directed energy deposition, the author praised the AltForm Zenit Modular family for its extensibility and a possible focus on reactive metals. He also notes that WAAM and DED are growing.

What else appeared in desktop printing and materials?

On the desktop side, the author points to the HeyGears G1, a full-colour jetting machine at about $3,000 that uses a line laser and lidar so no recoater is needed. Flashforge also showed a full-colour jetting printer. Other items included Elegoo's Centauri Ultra, Bambu Lab's H3C with Swaptek, Prusa's Zero Trace, a ruggedized air-gapped printer for military use, and Axiloop's eight-toolhead printer, which has raised $600,000 on Kickstarter.

In materials, Evonik showed a natural INFINAM PEEK 9359 F, and Xenia Materials debuted XECARB PEBA-CF, a tough energy-return material. Arkema released a sacrificial tooling resin, and FlexCycle Solutions presented a method to turn copper waste into printing powder.

How does the author read the show?

The author sees fewer exhibitors and more modest stands, but plenty of energy. He says the Helior, MachX, HP 1200 and Zenit were developed with customer feedback. He sees many companies building AM factories, but describes uneven results: orders are larger but concentrated on fewer winners. He cites EOS wins with VulcanForms, Incodema3D, I3D, Addman and Beehive, and notes that some smaller Chinese metal vendors offer little differentiation.

What it means

This is an opinion-led column, so it signals mood more than verified specifications. For small and mid sized manufacturers the practical points are the push toward automation and lower cost per part in powder bed systems, and the concentration of large orders among few buyers. Performance claims such as the Helior's 24-hour build remain vendor expectations until tested in production. Buyers should also weigh support and survival risk for smaller vendors with little differentiation.

Earlier on AddiWire

Frequently asked questions

What did Farsoon show at Formnext 2026?

Farsoon released the Flight HT1002P-CAMS, a polymer system with four 300 W lasers, a 1,000 × 500 × 650 mm build volume and a conveyor for moving builds. A metal system with the same feature was also released.

What does EOS expect from the Helior?

EOS says the three-laser Helior should complete a full 700 × 380 × 580 mm build in 24 hours at 10% packing density. Laser exposure can be adjusted to part geometry.

How does the author describe the overall mood?

Fewer exhibitors and more modest stands, but strong energy and many connections. Orders are bigger but concentrated among fewer winners.

Read the original reports
  1. 3DPrint.com, 19 Nov 2026