AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Farsoon FS4X metal printer debuts as Stark Future orders several for motorcycle parts

Published 3 sourcesSummary written with AIDeutsche Version

Farsoon introduced the FS4X at Formnext 2026, a laser powder bed fusion system for serial metal production with a choice of four or six lasers and optional automated powder and build-cylinder handling. Electric motorcycle maker Stark Future agreed to buy several units for a production line, with Farsoon also helping to build the surrounding workflow from parameters to validation. The deal shows metal AM vendors selling whole production cells rather than single machines.

Key facts
  • Build volume about 99 litres; four 2,000 W or six 1,000 W lasers
  • Open platform for user-developed material parameters
  • Stark Future orders several units for a serial production line
  • Earlier KLINGA Project yielded over 1,000 titanium parts

Context L-PBF (laser powder bed fusion) melts thin layers of metal powder with a laser inside a closed chamber, building the part layer by layer.

What the FS4X offers

The FS4X has a build volume of about 99 litres, measuring 425 x 425 x 550 mm. Buyers choose between four lasers rated at 2,000 W each or six lasers at 1,000 W each, and variable beam shaping lets users adapt exposure strategies to the part. The platform is open, so material parameters and process steps can be tuned to specific alloys and geometries. Farsoon does not state build rates.

How it keeps the process stable

Automatic scanner calibration and laser-to-laser alignment aim at consistent optics across all lasers. Multi-layer gas flow, recirculating filtration, pressure control and cooling hold chamber conditions steady. A one-piece build cylinder is meant to reduce powder leaks, a linear encoder closes the loop on the Z axis, and a low-drag recoater limits disturbance of the powder layer. According to 3Druck.com, a tool lock allows the recoater blade to be swapped without opening the chamber to ambient air.

Automation and the Stark Future line

The system belongs to Farsoon's CAMS automation concept. Driverless vehicles can move sealed build cylinders between printer, cooling and downstream stations, while a powder handling system recovers, sieves and conveys powder in an enclosed way. Prepared jobs allow automatic job changes outside staffed shifts. Stark Future will buy several machines and work with Farsoon on material and parameter development, build preparation, heat treatment, finishing, inspection, traceability and production validation. Stark's CEO cites weight reductions of up to 50 percent in some parts. The two firms previously cooperated on the KLINGA Project, which produced over 1,000 titanium parts. The machine will be installed at Farsoon Europe's Innovation Center in Sindelfingen.

What it means

For manufacturers weighing metal AM, the notable part is the scope: the order covers heat treatment, finishing, inspection, traceability and validation, which is where most series projects stall. Open parameters help, but qualification effort stays with the buyer. Farsoon itself notes that cost per part depends on utilisation, alloy, geometry and quality demands, and no build rates are published. Smaller EU firms should treat this as a reference for cell design, not as proof of cost parity. It follows Farsoon's earlier Formnext announcement of multi-laser systems with cartridge automation.

Earlier on AddiWire

Frequently asked questions

What laser configurations does the Farsoon FS4X offer?

Buyers can choose four lasers of 2,000 W each or six lasers of 1,000 W each, combined with variable beam shaping.

What will Stark Future use the FS4X for?

Stark Future plans a production line of several FS4X machines for metal motorcycle components, aiming at consistent serial output with little scrap, rework and downtime.

Does Farsoon publish build rates for the FS4X?

No. According to 3Druck.com, the manufacturer gives no concrete build rates.

Read the original reports
  1. VoxelMatters, 19 Nov 2026
  2. 3Druck.com, 20 Nov 2026
  3. 3Druck.com, 20 Nov 2026