AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Farsoon pairs eight-laser metal and four-laser polymer printers with cartridge automation

Published 1 sourceSummary written with AIDeutsche Version

Farsoon has introduced two large-format powder bed fusion systems at Formnext 2026: the FS722M for metal and the Flight HT1002P-CAMS for polymer. Both use cartridge-based CAMS automation to cut idle time between builds. The company also shows single-piece titanium exhaust systems printed for all ten Apollo Evo hypercars.

Key facts
  • FS722M: eight 1,000 W lasers, 720 × 420 × 650 mm build volume
  • Flight HT1002P-CAMS: four 300 W lasers, 325 litre chamber, up to 220 °C
  • Both replace older Farsoon systems and use cartridge-based CAMS automation
  • Ten one-piece TA15 titanium exhausts printed for Apollo Evo hypercars on an FS811M-6

Context CAMS is Farsoon's Continuous Additive Manufacturing Solution: exchangeable build cartridges move on a conveyor between the printer and separate stations, so the machine does not wait for cooling or part removal.

What does the FS722M offer for metal parts?

The FS722M replaces the FS721M and FS721M-H. It has a rectangular 720 × 420 mm bed with 650 mm height and eight 1,000 W lasers, rated by Farsoon at up to 1,000 cm³/h depending on material and settings. Target uses are automotive components, tooling inserts and large machine parts. Process control relies on digital optics, adjustable scan strategies, an improved multi-layer gas flow and an upgraded recoater blade, with real-time monitoring and layer cameras for traceability.

In the FS722M-CAMS version, a conveyor carries build cartridges to an external dock and on to an inerted breakout station while the next cartridge is prepared. Powder recycling, sieving, storage and feeding run closed-loop under inert gas. Farsoon states that real utilization gains depend on the chosen automation setup and the customer's workflow.

How does the Flight HT1002P-CAMS differ?

The polymer system succeeds the HT1001P and Flight HT1001P-H. Its 1,000 × 500 × 650 mm chamber (325 litres) suits long one-piece parts such as ducts and interior trim, or large batches. Four 300 W fiber lasers scan at up to 20 m/s, which Farsoon says raises productivity over conventional CO2 polymer SLS. Chamber temperature reaches 220 °C, with multi-zone heating and infrared monitoring to keep the large bed even.

The automation is modular. A conveyor serves the build station from both sides, and heating, cooling and breakout stations can be arranged separately, or built into cells served by AGVs or robot arms. Options include laser window changers, closed-loop powder handling, MES integration and remote monitoring.

What is the Apollo hypercar exhaust case?

Farsoon Europe and Apollo Automobil printed one-piece titanium exhaust systems for all ten Apollo Evo cars, described as among the largest AM titanium exhausts for a road vehicle. They were built on an FS811M-6 in TA15 alloy with a much thicker layer setting. Beam Shaping let each pipe be built without internal supports and without welded sections. A "Dragon Skin" texture forms during the build, and the tips are machined to a chrome finish. Apollo says the parts passed functional, durability, thermal and track tests.

What it means

For manufacturers weighing series production, the focus on non-printing time matters as much as laser count: idle machine hours drive cost per part. Cartridge conveyors only pay off with enough volume and a defined workflow, and they add inert handling, floor space and integration effort that smaller firms must budget for. Farsoon itself says gains depend on configuration. Large formats also raise qualification stakes, since a failed build wastes more powder and time. The Apollo exhaust shows consolidation, but it is a low-volume luxury case.

Earlier on AddiWire

Frequently asked questions

What do the FS722M and Flight HT1002P-CAMS replace?

The FS722M succeeds the FS721M and FS721M-H. The Flight HT1002P-CAMS succeeds the HT1001P and Flight HT1001P-H.

What does CAMS do?

Exchangeable build cartridges move on a conveyor between the printer and external stations, so loading, cooling and part removal happen while the next build proceeds.

How were the Apollo exhausts made without supports?

Farsoon's Beam Shaping technology let each pipe be printed in one piece in TA15 titanium on an FS811M-6, without internal supports or welded sections.

Read the original reports
  1. 3D Printing Industry, 17 Nov 2026