AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Axtra3D ties build prep, washing and curing together for Formnext

Published 2 sourcesSummary written with AIDeutsche Version
Axtra3D ties build prep, washing and curing together for Formnext
Image: Axtra3D

Axtra3D has released version 1.3 of its Volume build preparation software, plus the Axtra Wash Series 1 and Axtra Cure Series 1 post-processing units, all feeding into its Axtra Workflow environment. The company also points to a UL Blue Card for Arkema's flame-retardant N3D-FR512 resin. The aim is a more repeatable path from file to finished resin part, shown at Formnext 2026.

Key facts
  • Volume Professional 1.3 and Industrial 1.3 add new slicing and support generation
  • Wash Series 1 has two 50-litre tanks; Cure Series 1 has 324 UV LEDs
  • Cure oven reaches 250 °C; orders for both units are open
  • Arkema N3D-FR512 resin received a UL Blue Card; Axtra3D shows at Formnext Booth B36, Hall 12.1

Context A UL Blue Card is a listing issued after an independent body has validated a plastic material's performance, here for flame retardancy.

What is new in the Volume 1.3 software?

Volume Professional 1.3, supplied with the Lumia X1 printer, and Volume Industrial 1.3 cover nesting, build preparation and optimisation. Both bring new slicing and support tree generation, and handle stability of dimensions, part placement, collision checks and model repair. Eventually they are to become part of an integrated Axtra Workflow solution.

Volume Industrial 1.3 targets manufacturing users. It adds wireframe supports for large parts and full builds, texturing from custom bitmaps or 100 presets, wider printability checks, advanced nesting and live distance feedback while parts are positioned.

How do the Wash and Cure Series 1 units work?

Axtra Wash Series 1 washes and dries in one automated station. It uses preset agitation modes, Venturi and nanobubble eductor technology, and a traveling compressed-air knife. It has two removable 50-litre tanks, a touchscreen with standard and custom profiles, a self-cleaning chamber, a stainless-steel tub and an end-of-cycle exhaust to limit exposure to detergent vapours.

Axtra Cure Series 1 stacks a UV chamber above a thermal oven. The two run independently, so either or both can be used. The UV chamber has 324 LEDs at 365, 385 and 405 nm with programmable time and power, and the oven reaches 250 °C. Both units connect to Axtra.insight, work with the Lumia X1 family and also with other photopolymer processes such as SLA and DLP. Orders are open.

What does the UL Blue Card mean for the resin?

Arkema's halogen-free N3xtDimension N3D-FR512 flame-retardant resin has received a UL Blue Card. Reported values include 5,100 MPa tensile modulus, 42 MPa tensile strength, 4.2% elongation at break and 170 °C heat deflection at 0.455 MPa. Suggested uses include electrical connectors, enclosures, cable management and industrial control housings. Axtra3D is at Formnext Hall 12.1, Booth B36.

What it means

For resin users, post-processing is often where repeatability is lost, so linking prep, washing and curing under shared settings addresses a real cost driver: manual handling and rework. The claims on labour and consistency come from the vendor and are untested here. A UL-listed flame-retardant resin may shorten qualification for electrical housings, though end-part approval still sits with the manufacturer. This continues the earlier Axtra3D wash, cure and Volume 1.3 stories.

Earlier on AddiWire

Frequently asked questions

What temperatures and wavelengths does Axtra Cure Series 1 offer?

Its UV chamber runs at 365, 385 and 405 nm, and the separate thermal oven heats up to 250 °C. UV and thermal steps can be used independently or together.

Do the new units only work with the Lumia X1?

No. They work with the Lumia X1 family and with other photopolymer processes, including SLA and DLP.

Which parts is the flame-retardant Arkema resin aimed at?

Suggested uses include electrical connectors, circuit protection parts, electronic enclosures, cable management, automotive electrical components and industrial control housings.

Read the original reports
  1. 3DPrint.com, 16 Nov 2026
  2. VoxelMatters, 16 Nov 2026