AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Formnext briefs: ATLIX, AM Solutions, Axtra3D and AIM3D show automation and new materials

Published 1 sourceSummary written with AIDeutsche Version

At Formnext in Frankfurt, ATLIX showed its full xBUILD line, a robotic build-exchange concept with DHR Engineering and a wider BMW Group collaboration. AM Solutions launched powder supply units for EOS SLS printers, Axtra3D added two photopolymers, and AIM3D certified a pellet-fed system for ULTEM 9085 aerospace parts. The common thread is less manual handling and lower cost per part.

Key facts
  • xBUILD 5000: four 1.5 kW lasers, 500 x 500 x 600 mm, restart within 15 minutes
  • PMS supplies up to four EOS SLS printers from the F1
  • UltraCur3D xMOLD: AM Marketplace claims up to 90% lower tooling cost
  • AIM3D ExAM A 510 certified for ULTEM 9085 aerospace use

Context ULTEM 9085 is a flame-retardant polyetherimide thermoplastic widely used for aircraft interior parts.

What did ATLIX show for metal powder bed fusion?

ATLIX, the TRUMPF carve-out that introduced its name at last year's Formnext, presented the complete xBUILD portfolio with customer applications from four industries. With DHR Engineering it unveiled a concept that pairs DHR's automation for continuous printing with the xBUILD 3000, which has a 300 x 300 x 400 mm build volume and two 700 W lasers that both reach the full plate. An industrial robot handles powder and cylinders, and a custom lid system lets the printer move from one build to the next without manual steps. ATLIX describes it as a shared vision, not a finished product.

ATLIX also expanded its work with the BMW Group: xBUILD 5000 systems are planned for BMW's Additive Manufacturing Campus in Oberschleißheim. The machine has four 1.5 kW lasers over a 500 x 500 x 600 mm platform. Cylinders are loaded on one side and sealed gas-tight and unloaded on the other, and production restarts on its own within 15 minutes. BMW will make aluminium parts for prototyping and series use.

How does AM Solutions close the powder loop for SLS?

AM Solutions premiered the Powder Management System (PMS) and Direct Feeding System (DFS). Until now, powder from the F1 Powder Handling System had to be moved to the printer by hand with an adapter. The DFS returns processed powder directly from the F1 to one EOS SLS printer through a 180 L Polybox, while the PMS distributes it to up to four printers.

The PMS has two Polyboxes and switches automatically when one is empty, with light signals for refilling. Because it is fully enclosed and uses air recirculation and filters, dust exposure is reduced. The loop now covers printing, unpacking in the D1, powder preparation and resupply.

Which materials did Axtra3D add?

For the Lumia X1, Axtra3D added UltraCur3D xMOLD from AM Marketplace and ATARU Black from QTREX. xMOLD is a dissolvable photopolymer for sacrificial injection molding tools; AM Marketplace says it can cut tooling costs by up to 90% in suitable applications. ATARU Black is a silica-filled photopolymer with a glass transition temperature and a heat deflection temperature above 300°C, aimed at RF parts, connectors and heat-resistant fixtures.

What does the AIM3D certification cover?

AIM3D certified its pellet-fed ExAM A 510, where the A stands for aviation, for ULTEM 9085. The certification process was run with Stefan Roeding of AM-MRO GmbH. Changes include uniform chamber temperature, controlled material feeding with regard to dryness, temperature and tamper protection, easier support removal and a camera instead of a viewing window. The system had to show consistent tensile strength in ULTEM 9085 specimens regardless of build position.

What it means

The common theme is removing manual steps between builds and around powder, which is where labour and risk sit once a machine runs in series. For SMEs the xBUILD cell is a concept and the powder units serve EOS SLS users, so near-term relevance is narrow. The AIM3D certification is more concrete for aerospace suppliers, but the process still needs the customer's own qualification. The BMW plan continues the xBUILD 5000 story from earlier this week.

Earlier on AddiWire

Frequently asked questions

What will BMW use the ATLIX xBUILD 5000 for?

BMW plans to install xBUILD 5000 systems at its Additive Manufacturing Campus in Oberschleißheim to make aluminium components for prototyping and series use.

Is the ATLIX and DHR Engineering robotic cell a product?

No. It is a concept demonstration pairing DHR's automation with the xBUILD 3000, described as a shared vision, not a finished product.

What do the AM Solutions PMS and DFS do?

They automatically return processed polymer powder from the F1 to EOS SLS printers: the DFS serves one printer and the PMS up to four.

Read the original reports
  1. 3DPrint.com, 19 Nov 2026