BMW plans to install multiple ATLIX xBUILD 5000 laser powder bed fusion systems at its Additive Manufacturing Campus in Oberschleißheim. The machines will make aluminium parts for prototyping and series use. ATLIX positions the four-laser system for unattended operation and a lower cost per part, building on a collaboration that began in 2019.
What the xBUILD 5000 offers
The system has four 1.5 kW lasers working at the same time across a 500 x 500 x 600 mm build area. An automatic multi-laser alignment system is meant to keep part quality consistent over the whole platform. ATLIX also stresses a compact footprint to raise output per square metre of floor.
How the automated cylinder flow works
Empty build cylinders go in on one side. The machine loads a cylinder, calibrates itself and starts building without an operator. A finished cylinder is sealed gas-tight and leaves on the opposite side, where it cools on its own while the next one is loaded. Production restarts within 15 minutes.
Background of the BMW and ATLIX cooperation
ATLIX, formed from Trumpf's additive manufacturing business, and BMW began working together in 2019 in the research project IDAM, which first showed the value of robust automation. BMW opened its campus in 2020 and has added wire arc additive manufacturing, with a first WAAM component expected in a vehicle launching next year. At Formnext, ATLIX also announced a robotic cell with DHR Engineering for its xBUILD 3000.
What it means
For smaller manufacturers the signal is the focus on cost per part through lights-out operation, not on laser count alone. Such savings depend on high utilisation and stable, qualified processes, which an OEM campus can provide more easily than a mid-sized shop. Prices and delivery dates are not given, and the cost advantage is an ATLIX claim. Buyers should compare automation effort and powder handling with their own volumes. This follows ATLIX's xBUILD 5000 and robotic exchange concept shown at Formnext.
Frequently asked questions
What will BMW produce on the xBUILD 5000?
BMW is expected to make aluminium components for prototyping and series use at its Additive Manufacturing Campus in Oberschleißheim.
How long does the machine take to restart after a build?
ATLIX says production restarts within 15 minutes, as the next empty cylinder is loaded automatically while the finished one cools separately.
Since when do BMW and ATLIX work together?
The collaboration began in 2019 with the research project IDAM on industrialisation and digitalisation of additive manufacturing.