AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Software

Dyndrite gives Xact Metal printers direct scan-card access for arc toolpaths

Published 1 sourceSummary written with AIDeutsche Version

Dyndrite and Xact Metal have connected Dyndrite LPBF Pro directly to the scan card of Xact Metal's laser powder bed fusion printers. Users can program native arcs, Bézier curves and wobble movements instead of chains of short straight vectors. It is available on the XM200G and XM200G µHD, with the XM300G to follow, and is shown at Formnext 2026.

Key facts
  • Available on XM200G and XM200G µHD; XM300G support planned
  • Native arc replaces about 222 vectors for a 10 mm radius circle at 1 µm
  • Supports Bézier curves, wobble, skywriting and dynamic laser power
  • Shown at Formnext 2026, Hall 12.0, booth C89

Context LPBF (laser powder bed fusion) melts metal powder layer by layer with a laser steered by scanning mirrors; the scan card is the controller that sends movement commands to those mirrors.

What changes in the toolpath

Conventional LPBF toolpaths approximate curves with many short straight vectors. Dyndrite states that holding 1 µm geometric accuracy on a circle of 10 mm radius takes about 222 vectors, against one command for a native arc. Each change of direction can also force the scanning mirrors to slow down, which affects local energy input.

The integration sends commands straight to the printer's scan card. Besides arcs it supports Bézier curves, wobble movements, mark, jump and polyline delays, skywriting parameters, dynamic laser power and pulsing.

Examples and open questions

Dyndrite points to thin circular walls: filling a 1 mm ring with straight hatch lines makes the laser return to neighbouring areas before they have cooled. In its illustration, 150 short lines become eight continuous arcs. For turbine blade airfoils, parametric hatching can follow the curvature and lower laser power toward the narrow trailing edge.

The companies say these are capability demonstrations, not recommended production strategies, and any toolpath must be validated for the metallurgical and mechanical properties of the part. They expect smaller build files, shorter print times, less optics wear, better surface finish and less porosity, but have not published comparative build data.

Context

In 2025 Dyndrite connected LPBF Pro to EOS Open Architecture through the EOS Toolpath API for vector-level control of speeds, feeds and exposure. The Xact Metal step goes to the scan card itself. The XM200G already lets experienced users change melting power and scan speed. The integration is shown at Formnext in Hall 12.0, booth C89.

What it means

For small and mid sized users, finer toolpath control is a process development tool, not a switch that lowers cost per part. Claimed gains in speed, surface and porosity are unproven without build data, and each new strategy needs its own validation, which adds qualification effort and requires in-house process skills. The practical value lies in specific thin-wall or curved features where hatching causes known problems. Buyers should ask for comparative data on their own material before counting on any saving.

Frequently asked questions

Which Xact Metal printers are supported?

The integration works on the XM200G and XM200G µHD. Support for the XM300G is planned.

What can users program with direct scan-card access?

Native arcs, Bézier curves, wobble movements, skywriting, delay settings, dynamic laser power and pulsing, sent directly to the scan card.

Are the claimed quality and speed gains proven?

Not yet publicly. The companies have not released comparative build data for specific materials or machine configurations.

Read the original reports
  1. 3D Printing Industry, 19 Nov 2026