AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

Brazilian university starts two large cement printers from Spain's Be More 3D

Published 1 sourceSummary written with AIDeutsche Version

The Universidade Estadual de Londrina in Brazil now runs two large-format cement printers from Spanish maker Be More 3D. The university says no other university in the state operates machines of this size. The team develops its own printable mix and plans public toilet modules as its first larger project.

Key facts
  • Two Be More 3D cement printers installed at UEL in Londrina, Brazil
  • Small unit prints 1 × 1 m; large rail unit up to 5 × 9 m
  • First project: two 2.30 m accessible public toilet modules
  • Funded via Fundo Paraná; installation supported in September

Context Cementitious printing extrudes a pumpable mortar layer by layer, so the mix must hold its shape and bear the load of the layers above before it hardens.

What was installed in Londrina?

The two printers stand in the Éconus 3D technology lab at the university's engineering and urban planning centre. The smaller one prints on 1 × 1 m and is used for mix tests and prototypes. The larger one runs modularly on rails and covers up to 5 × 9 m, enough for the walls of a house of about 45 m². Because of room size it currently works at 5 × 7 m. The state science ministry funded the machines through Fundo Paraná, and builder Pacaembu prepared the rooms in a public-private partnership.

What will the team print?

The group around Berenice Martins Toralles develops the printing mix itself. It must pump, extrude, hold its shape and carry the weight of later layers. First larger project: two accessible public toilet modules, 2.30 m high, printed in one piece with openings and conduits, then lifted to site. A doctoral project studies printed parts for modular systems, such as emergency shelters.

What it means

For small and mid-sized construction firms in the EU, university printers like these mainly matter as a source of tested mixes and structural data. The lab plans services for companies and municipalities. Moving from prototypes to certified building elements still needs standardised material tests and approvals, which depend on local rules and take time.

Frequently asked questions

How large is the bigger printer's build area?

It covers up to 5 × 9 m on rails, but currently works at 5 × 7 m because of the room size.

Who paid for the printers?

The state science ministry financed them through Fundo Paraná. Pacaembu prepared the rooms in a public-private partnership.

Read the original reports
  1. 3Druck.com, 19 Nov 2026