AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Desktop 3D printing

Bambu Lab launches Bambu Circle, a certified local service network, in the Netherlands

Published 1 sourceSummary written with AIDeutsche Version

Bambu Lab presented Bambu Circle at Formnext 2026, a programme that trains and certifies local entrepreneurs to service printers, sell equipment and materials, print on demand and teach. A pilot starts in the Netherlands, with Germany and France planned for early 2027. The company also showed the nine-tool H3C printer and the R1 laser cutter.

Key facts
  • Pilot starts in the Netherlands; Germany and France planned for early 2027
  • Goal: an authorised partner within one hour's drive of every European customer
  • H3C: nine tools, tool change under six seconds, up to 24 materials
  • R1 is a 55 W CO2 laser cutter, shown at Hall 12.1, Booth G01

What does Bambu Circle offer?

Bambu Circle is meant to create a network of authorised local partners inside the Bambu Lab ecosystem. Partners may service machines, sell printers and materials on a small scale, offer on-demand 3D printing and run training. Bambu Lab coordinates the programme, provides training and certifies the businesses. The MakerWorld platform is to be part of it, but the company has not said how it will connect to individual partners.

Where does it start and how far will it go?

The pilot begins in the Netherlands, chosen after a survey in which, per the company, 58% of Dutch users were interested in earning extra income with 3D printing. Germany and France follow in early 2027. Prospective partners elsewhere in Europe can join a waiting list. The long-term aim is an authorised partner within a one-hour drive of every European customer.

What else was shown at the booth?

The H3C is the first third-generation Bambu Lab printer. Its Swaptek system has nine independent tools, each with its own filament path and heater, so tool changes take under six seconds, according to the company. With an AMS connected it can handle up to 24 materials in one job. The FlexFeed extruder is built for TPU down to Shore 75A in 1.75 mm and 2.85 mm. The R1 is a 55 W CO2 laser cutter and engraver, the company's first product outside 3D printing.

What it means

For industrial buyers this is mainly a signal about desktop FDM support: certified local servicing and training could shorten downtime for small shops running Bambu printers. It is not an industrial qualification scheme, and the report gives no detail on certification criteria, pricing or service levels. This continues the earlier report on Bambu Lab's planned certified partner network across Europe. Realistic timelines are early 2027 for Germany and France, so planning should wait for concrete partner terms.

Earlier on AddiWire

Frequently asked questions

Where will Bambu Circle launch first?

The pilot starts in the Netherlands, followed by Germany and France in early 2027. A waiting list is open for prospective partners across Europe.

What can Bambu Circle partners do?

They may service printers, sell machines and materials on a small scale, offer on-demand 3D printing and run educational programmes, after training and certification by Bambu Lab.

What is the H3C?

It is Bambu Lab's first third-generation printer, with nine independent tools and tool changes under six seconds, and up to 24 materials per job when linked to an AMS.

Read the original reports
  1. 3D Printing Industry, 19 Nov 2026