SoftwareAdaOne CAM software now supports AddUp's BeAM 400 and 800 DED machines
Fives AddUp and software developer ADAXIS announced a partnership at Formnext 2026 for laser powder directed energy deposition (DED-LB/P). ADAXIS's AdaOne CAM software now covers the BeAM 400 and BeAM 800 machines. Users can plan multi-axis deposition paths, simulate motion and generate CNC programs, with deeper data exchange planned.
Key facts- Announced at Formnext 2026 by Fives AddUp and ADAXIS
- Supports BeAM 400 and BeAM 800 DED-LB/P machines
- Valve part in Maraging 300 at about 1 kg per hour
- Planned: machine data access, kinematics simulation, heat accumulation modelling
Context In DED-LB/P, a laser creates a small melt pool and metal powder is fed into it by the processing head, so material delivery moves with the head instead of sitting in a powder bed.
What AdaOne does for BeAM users
AdaOne is installed locally and adds a separate environment for job preparation. Operators of the BeAM 400 and BeAM 800 can lay out multi-axis toolpaths, simulate the machine movements and output programs for the CNC controller. Path planning for DED is demanding because head orientation, accessibility and changing process conditions all have to be considered. The process suits repairs, coatings and adding features to existing parts.
What is planned next
The partners intend to extend data exchange: access to machine and process parameters, more reliable program transfer to the controller and simulation of the real machine kinematics. The roadmap also lists variable laser power and powder feed rate, speed changes during acceleration and braking, and heat build-up during deposition. Sensor data is meant to feed into planning later. AdaOne will also support AddUp's Laser Technical Center in developing and validating laser applications.
Demonstration parts
AddUp shows a valve component in Maraging 300 steel built on the BeAM 400 at roughly one kilogram per hour, and a Ti-6Al-4V turbine blade repair using AdaOne-optimised paths.
What it means
For manufacturers considering DED, toolpath programming is often the hidden effort, so a CAM package matched to the machine kinematics can cut preparation time and trial builds. Whether it does so is still unproven, since the process-aware features are roadmap items and no industrial results are reported. Small firms should check licence cost, the CNC controller handover and whether repair or coating work justifies the setup. Qualification still depends on process control, not on software alone. This continues AddUp's recent opening of its FormUp machines to Dyndrite software.
Frequently asked questions
Which machines does AdaOne now support?
AdaOne supports the Fives AddUp BeAM 400 and BeAM 800 DED-LB/P machines.
What can users do with it?
They can plan multi-axis deposition paths, simulate machine motion and generate CNC programs, with data exchange and process-aware planning to be extended.
Which parts were shown?
A Maraging 300 valve component built at about 1 kg per hour on the BeAM 400, and a Ti-6Al-4V turbine blade repair.