AddiWire

Additive manufacturing news and European prices, with independent expert commentary

Industrial AM

3D Systems unveils MJP 300 multijet printer with three build lanes for Q1 2027

Published 3 sourcesSummary written with AIDeutsche Version

3D Systems introduced the MJP 300 multijet plastics printer at Formnext 2026, with a 294 x 211 x 144 mm build volume that can be split into three lanes. Orders are planned to open in the first quarter of 2027. The launch comes with a closed-loop powder module for metal printers and new data-protection tools in the company's build software.

Key facts
  • Build volume 294 x 211 x 144 mm, divisible into three lanes
  • Five VisiJet acrylate materials at launch, more planned
  • Available to purchase from Q1 2027
  • TSR powder module developed with Russell Finex technology

Context Multijet printing deposits droplets of photocurable acrylate resin from many nozzles and cures them with light, which yields smooth, fine-detail plastic parts.

What does the MJP 300 offer?

The MJP 300 has a build volume of 294 x 211 x 144 mm, which can be divided into three lanes. Small or tall parts can be grouped in one lane so the machine does not have to use its full build area. According to 3D Systems, the system has revised electronics for faster data handling, plus extra build modes that trade speed against sharper, smoother surfaces. German coverage cites HD, UHD and XHD modes, layer heights down to 16 micrometres and a resolution of 1600 x 900 dpi, along with less support material and simpler post-processing.

Which materials and software come with it?

At launch the printer handles five acrylate VisiJet materials: M2P-Crystal, M2R-WH, M2R-CL, M2R-TN and M2R-HT90, with more planned. The M2P-CST Crystal material runs in an XHD mode and a very fast HD mode. Control is through 3D Sprint, which gains a digital rights management component called .finite to protect 3D data and, per the German report, to limit print releases by time and quantity. It is offered first for the MJP 300 and MJP 300W. The new AddiTrak software covers fleet monitoring, and the machine has cybersecurity features aimed at ESA/IEC compliance.

What else was announced?

For DMP Flex 350 metal printers, 3D Systems added the TSR (Transport-Sieve-Reload) module, which recovers, sieves and refills powder in a closed, inert loop. One module can serve several compatible printers, and the powder handling was developed with Russell Finex technology. An Industrial Wax Kit for the MJP 300W Plus allows larger casting patterns. CEO Jeff Graves tied the launches to the company's focus on healthcare, dental, and aerospace and defence. The MJP 300 is shown at Formnext in Hall 11.0, stand D11.

What it means

The MJP 300 is a roadmap item for 2027, not a machine available now, so its claimed speed and surface gains still need verification in series use. The lane concept matters for mixed small batches, where build-area utilisation drives cost per part. Data-protection and fleet tools address the traceability and IP questions that come up in qualification and supplier audits. For smaller EU firms, TSR is relevant mainly where powder handling and operator exposure limit metal AM. This continues the earlier Formnext announcement of the MJP 300 and the closed-loop powder module.

Earlier on AddiWire

Frequently asked questions

When will the MJP 300 be available?

3D Systems plans to make the MJP 300 available to purchase in the first quarter of 2027. It is on show at Formnext 2026 in Hall 11.0, stand D11.

How large is the MJP 300 build volume?

The build volume is 294 x 211 x 144 mm and can be split into three lanes so small or tall parts can be grouped.

What does the TSR module do?

TSR recovers, sieves and refills metal powder in a closed, inert loop for DMP Flex 350 printers, which is meant to cut operator contact with powder and limit oxygen pickup.

Read the original reports
  1. TCT Magazine, 17 Nov 2026
  2. 3Druck.com, 17 Nov 2026
  3. VoxelMatters, 18 Nov 2026